Shell Marine announces its latest Cylinder Lubricant Development: Shell Alexia 140
Shell Marine has given ship owners an insight into the comprehensive approach driving its ground-breaking work to protect the most modern ultra-efficient diesel engines against cold corrosion while still optimizing cylinder oil feed rates, across the entire range of vessel operating conditions.
Shell Marine has been working very closely with the major OEMs and several ship owners who fully support this development. Following its formulation and exhaustive laboratory testing in 2015, the new Shell Alexia 140 has successfully completed over six months of shipboard trials with a Shell Marine customer.
鈥淲e are responding rapidly to the changing needs of the industry, helping our customers to cope with their full range of operating conditions,鈥 said Jan Toschka, General Manager of Shell Marine. 鈥淭his latest development underpins our commitment to the industry and its future. We have our own in house testing capability and extensive field experience, coupled with the monitoring, analysis and advisory services to respond to the market with proven and comprehensive solutions.鈥
The new lubricant, Shell Alexia 140, is an ultra-high BN oil with a BN of 140. It is targeted for use on its own or as part of an onboard lubricant blending or mixing system. MAN Diesel and Turbo (MDT) told this year鈥檚 CIMAC in Helsinki that it had been trialing 鈥楢COM鈥 (Automated Cylinder Oil Mixing), the two-stroke marine engine major鈥檚 pilot scheme to establish best practice in matching lubricant BN to fuel sulphur content whilst minimising lubricant feed rates. A Shell Marine customer was selected for the first batch of trials.
鈥淢ajor OEMs now recommend cylinder drain oil analysis as a way for ship owners to optimise feed rates as it allows them to strike the right balance between corrosion protection and minimised oil consumption,鈥 added Mr. Toschka. 鈥淪hell Marine is focusing on solutions that are operationally straightforward. These include cylinder oil condition monitoring and drain oil analysis, the software and advisory services that help to interpret and implement OEM requirements, and assisting ship operators to develop crew skills as well as knowledge. In all areas, our objective is to work with the customer to deliver the most reliable solution.鈥
Enquiries:
About Shell marine products
Shell provides lubricants for the marine industry through its Shell Marine Products business. It serves over 10,000 vessels, ranging from large ocean-going tankers to small fishing boats in over 600 ports across 57 countries. The advice and technical services we provide help our customers achieve maximum value from using our lubricant products across all types of machinery and equipment on a ship.
Royal Dutch Shell plc
Royal Dutch Shell plc is incorporated in England and Wales, has its headquarters in The Hague and is listed on the London, Amsterdam, and New York stock exchanges. Shell companies have operations in more than 70 countries and territories with businesses including oil and gas exploration and production; production and marketing of liquefied natural gas and gas to liquids; manufacturing, marketing and shipping of oil products and chemicals and renewable energy projects. For further information, visit www.shell.com
Cautionary Note
The companies in which Royal Dutch Shell plc directly and indirectly owns investments are separate legal entities. In this press release 鈥淪hell鈥, 鈥淪hell group鈥 and 鈥淩oyal Dutch Shell鈥 are sometimes used for convenience where references are made to Royal Dutch Shell plc and its subsidiaries in general. Likewise, the words 鈥渨e鈥, 鈥渦s鈥 and 鈥渙ur鈥 are also used to refer to subsidiaries in general or to those who work for them. These expressions are also used where no useful purpose is served by identifying the particular company or companies. 鈥樷楽ubsidiaries鈥欌, 鈥淪hell subsidiaries鈥 and 鈥淪hell companies鈥 as used in this press release refer to companies over which Royal Dutch Shell plc either directly or indirectly has control. Entities and unincorporated arrangements over which Shell has joint control are generally referred to 鈥渏oint ventures鈥 and 鈥渏oint operations鈥 respectively. Entities over which Shell has significant influence but neither control nor joint control are referred to as 鈥渁ssociates鈥. The term 鈥淪hell interest鈥 is used for convenience to indicate the direct and/or indirect ownership interest held by Shell in a venture, partnership or company, after exclusion of all third-party interest.
This press release contains forward-looking statements concerning the financial condition, results of operations and businesses of Royal Dutch Shell. All statements other than statements of historical fact are, or may be deemed to be, forward-looking statements. Forward-looking statements are statements of future expectations that are based on management鈥檚 current expectations and assumptions and involve known and unknown risks and uncertainties that could cause actual results, performance or events to differ materially from those expressed or implied in these statements. Forward-looking statements include, among other things, statements concerning the potential exposure of Royal Dutch Shell to market risks and statements expressing management鈥檚 expectations, beliefs, estimates, forecasts, projections and assumptions. These forward-looking statements are identified by their use of terms and phrases such as 鈥樷榓nticipate鈥欌, 鈥樷榖elieve鈥欌, 鈥樷榗ould鈥欌, 鈥樷榚stimate鈥欌, 鈥樷榚xpect鈥欌, 鈥樷榞oals鈥欌, 鈥樷榠ntend鈥欌, 鈥樷榤ay鈥欌, 鈥樷榦bjectives鈥欌, 鈥樷榦utlook鈥欌, 鈥樷榩lan鈥欌, 鈥樷榩robably鈥欌, 鈥樷榩roject鈥欌, 鈥樷榬isks鈥欌, 鈥渟chedule鈥, 鈥樷榮eek鈥欌, 鈥樷榮hould鈥欌, 鈥樷榯arget鈥欌, 鈥樷榳ill鈥欌 and similar terms and phrases. There are a number of factors that could affect the future operations of Royal Dutch Shell and could cause those results to differ materially from those expressed in the forward-looking statements included in this press release, including (without limitation): (a) price fluctuations in crude oil and natural gas; (b) changes in demand for Shell鈥檚 products; (c) currency fluctuations; (d) drilling and production results; (e) reserves estimates; (f) loss of market share and industry competition; (g) environmental and physical risks; (h) risks associated with the identification of suitable potential acquisition properties and targets, and successful negotiation and completion of such transactions; (i) the risk of doing business in developing countries and countries subject to international sanctions; (j) legislative, fiscal and regulatory developments including regulatory measures addressing climate change; (k) economic and financial market conditions in various countries and regions; (l) political risks, including the risks of expropriation and renegotiation of the terms of contracts with governmental entities, delays or advancements in the approval of projects and delays in the reimbursement for shared costs; and (m) changes in trading conditions. All forward-looking statements contained in this press release are expressly qualified in their entirety by the cautionary statements contained or referred to in this section. Readers should not place undue reliance on forward-looking statements. Additional risk factors that may affect future results are contained in Royal Dutch Shell鈥檚 20-F for the year ended December 31, 2015 (available at www.shell.com/investor and ). These risk factors also expressly qualify all forward looking statements contained in this press release and should be considered by the reader. Each forward-looking statement speaks only as of the date of this press release, 7 September 2016. Neither Royal Dutch Shell plc nor any of its subsidiaries undertake any obligation to publicly update or revise any forward-looking statement as a result of new information, future events or other information. In light of these risks, results could differ materially from those stated, implied or inferred from the forward-looking statements contained in this press release.
We may have used certain terms, such as resources, in this press release that United States Securities and Exchange Commission (SEC) strictly prohibits us from including in our filings with the SEC. U.S. Investors are urged to consider closely the disclosure in our Form 20-F, File No 1-32575, available on the SEC website .
